Our industrial oil burners are optimized for various light, heavy and waste oils. This product line provides superior combustion experience and results. Guarantee to reduce operational cost and thermal pollution.
Light Oil Burners of the MD-OL product line facilitates complete combustion over the full capacity range: 0.3MW-55MW <> 1mmBTUs/h-190mmBTUs/h:
Heavy Oil Burners of the MD-OH product line is optimized for specific heavy oil composition. MD-OH industrial burners product line facilitates complete combustion over the full capacity range: 0.3MW-55MW <> 1mmBTUs/h-190mmBTUs/h.
Industrial Waste Oil Burners of the MD-OW product line is optimized for any waste oil composition: light, heavy or waste oils which contain fine solids. MD-OW industrial burners product line facilitates outstanding combustion over the full capacity range: 0.3MW-55MW <> 1mmBTUs/h-190mmBTUs/h.
Advantage of Periflame MD-OW Industrial Waste Oil burners.
By Utilizing our patented burner’s schema:
- Eliminate overhead produced by high pressure configurations.
- Optimizing burner’s operational pressure 2.5-3.5 bar prevents blowing of seals
- Prevent clogging of atomizers by fuel solids
- Extend operational capacity range of a burner
- Periflame’s industrial burner model: MD-G-AH is specially designed for air heating equipment.
- MD-G-AH burners have an air-cooled embrasure and provide all of the combustion advantages available with our acclaimed MD-product lines. Specifically, outstanding flame stability, adjustable flame intensity and flame configuration.
- Contact us to find out how you can replace your old-fashioned duct burners with Periflame’s MD-G-AH burners today.
Our oil burners are compatible with:
- All capacity water heating and steam boilers
- Technological furnaces of the factories producing paper, bitumen, concrete, etc…
- Grain dryers, Wood dryers, Sand dryers, etc…
Industrial Burners are implemented in all major industries.
We guarantee the operational advantages of our straight-flow burners in comparison with the swirling vanes burners in boilers and furnaces.
Burner model | Capacity, HP | Capacity, MBTU/HR | Capacity, MW |
|---|---|---|---|
| МD-25-O | 0,015…0,03 | 0,51…1,0 | 0,15…0,3 |
| МD-40-O | 0,03…0,06 | 1,0…2,0 | 0,3…0,6 |
| МD-75-O | 0,05…0,10 | 1,7…3,4 | 0,5…1,0 |
| МD-150-O | 0,07…0,15 | 2,4…5,1 | 0,7…1,5 |
| МD-200-O | 0,10…0,22 | 3,4…7,5 | 1,0…2,2 |
| МD-250-O | 0,15…0,33 | 5,1…10,9 | 1,5…3,2 |
| МD-400-O | 0,26…0,53 | 8,5…17,7 | 2,5…5,2 |
| МD-700-O | 0,41…0,87 | 13,6…29,0 | 4,0…8,5 |
| МD-1000-O | 0,51…1,28 | 17,1…42,7 | 5,0…12,5 |
| МD-1500-O | 0,71…1,63 | 23,9…54,6 | 7,0…16,0 |
| МD-2000-O | 0,92…2,24 | 30,7…75,0 | 9,0…22,0 |
| МD-2500-O | 1,22…3,26 | 40,9…109 | 12,0…32,0 |
| МD-5000-O | 2,04…5,61 | 68,2…188 | 20,0…55,0 |
All burners come fitted with an electric igniter, UV flame sensor, an air dumper.
Burners can be customized with an oil control valve and a blower, and then marked (B).
Examples: MD-250-OL-B, MD-400-OH-B, MD-75-OW-B
In addition to the above, our burners can be customized with two safety valves, the set of the pressure gauges, controller unit and then marked (A).
Examples: MD-250-OL-B-A, MD-400-OH-B-A, MD-75-OW-B-A.